Do you have any questions?
Ask a consultant

MultiMix water filter WATEX CMA9

Manufacturer: WATEX
Product code: CMA09
Combination does not exist
735.00
889.35

APPLICATION

WATEX CMA series devices are organics reduction equipment for household use. It is able to purify from not only hardness, but also purify water from organics and iron. In purification process reagent (NaCl or salt tablets) has to applied for filtration media (resin) rinsing. Rinse water can be discharged directly to biological WWTP (wastewater treatment plant).

OPERATION AND APPLICATION

WATEX CMA series consists of a filter column, the control valve and salt tank. The filter column is filled up with ion exchange resin mixture (cationic and anionic), which reduces organics, ammonia, hardness and filters iron. The control valve performs automatic rinse. Salt tank is filled with the reagent (NaCl salt tablets) that is used for rinsing. Amount of water that can be purified is set depending on the amount of resins in equipment and provided water quality.
The equipment can also purify water from iron, but the iron content must not exceed 3.0 mg/l.
Although the equipment uses salt tablets for filtration media regeneration, water that has been purified can be used for drinking and satisfaction of other human needs.
To ensure operation of equipment connection to electricity (one socket) and ingoing water pressure of 2.5 bar has to be supplied.
Equipment can be installed in wet areas or underground mines, which are made of concrete rings.

FILTER CONTROL

The product has many parameters that can be adjusted according to your needs, such as rinse time, frequency, reagent consumption, and so on.
WATEX CMA series equipment is equipped with a Clack WS1CI control valve with built-in flow meter that allows to perform filter rinsing according to water consumption. Flowmeter saves water and salt needed for rinsing. Filter can be equipped with bypass line, which allows to switch off equipment and quickly perform preventive maintenance. Control valve saves all information in case of any power failure.

RECOMMENDATIONS

It is recommended to install mechanical filter before equipment to ensure long equipment life.

Show full description

Technical parameters of equipment

Unit

Model

CMA8

CMA9

CMA10

Flow rate Qnom

m3/h

0.6

0.82

1

The amount of water for regeneration

liters

150

180

205

Minimum flow rate for rinsing

m3/h

0.6

0.8

1.0

Tank size (diameter) 

inches

8

9

10

m

0.20

0.24

0.25

Tank volume

liters

25

32

64

Total amount of filrtation media

liters

15

25

40

Dimensions

 

Length

m

0.53

0.85

0.89

Width

m

0.20

0.24

0.25

Height

m

1.08

1.41

1.57

Water – drain connection

inches

1”

1”

1”

Clack control valve

 

Cl 1''

CI 1”

CI 1”

Filtration

 

organic admixtures, hardness, iron, turbidity, ammonium

Tank material

 

FRP (fiberglass)

Filtration media

 

Ion exchange resins RESINEX KW-8 and TPX4500, silica sand 1x3mm, 3x5 mm

Operating pressure

bar

2-6

Electric Connection

 

220V, 50Hz, 1 phase

Electricity consumption

W

3 W

Flowmeter

 

built-in

 

Width cm

Height cm

Length cm

Weight kg

25.00

140.00

55.00

39.25

Show full description
Show full description