WATEX CMS CAB GRAY water softener

Manufacturer: WATEX

Product code: CMSCABGRAY

Price without VAT

€ 600.00 € 650.00

Price with VAT

€ 726.00 € 786.50

– +

In stock:

Delivery time: 2-5 working days

DESCRIPTION:

Effective solution for water softening, iron, manganese and ammonium removal
Regeneration with brine solution from salt tablets (NaCl)
Reliable and efficient operation for at least 10 years
Apply for private houses, cottages, guesthouses connected to central water supply systems
Automatic purification and regeneration by volume control
Simple installation and maintenance
Low operating costs
High quality materials, components
Filter does not remove smell. WATEX CMB, CTO, CTC or MC should be installed in addition

WATER QUALITY PROBLEM

Hardness salts, Ca and Mg form scale deposits on heat exchangers, nozzles, fittings, pipes, sanitary facilities. Fine technical equipment rapidly out of order or increasing power consumption.

SOLUTION

The solution of these problems for households is softening by WATEX CMS CAB series ion exchange resin filters (reduces limescale) that are regenerated with NaCl. Water softening equipment also effectively reduce iron, manganese and ammonium.

FILTER PERFORMANCE

For recovery of filtration media (ion resins) reagent (NaCl or salt tablets) is used. Wastewaters produced in regeneration processes of equipment in WATEX CMS CAB can be directly discharged to biological wastewater treatment plant. WATEX CMS CAB consists of a filter column, control valve and salt tank. The filter column is filled with ion exchange resin (cationic), which reduces hardness and iron concentration in water. The control valve performs automatic regeneration. Salt tank is filled with a reagent (NaCl, salt tablets) for resin regeneration. Capacity of filtration media is calculated according to amount of resins and raw water quality.

FILTER CONTROL

WATEX CMS CAB is equipped with a Clack WSCI1 control valve, with a built-in flow meter that performs filtration media regeneration according to water consumption. Flowmeter saves water and salt used for filter regeneration. The valve can be fitted with a bypass pipeline that allows to perform maintenance works with ease. Control valve saves all information in case of power failure. Equipment has many parameters that can be adjusted according to needs, such as washing time, frequency, reagent consumption, and so on. It is possible to change the water hardness.

EQUIPMENT MAINTENANCE

Although the equipment uses salt tablets for regeneration it is safe to use filtered water for drinking and other human needs. It is necessary to provide electricity connection power (one socket), sewerage drainage and incoming / outgoing water supply with minimum pressure of 2.5 bar.

RECOMMENDATIONS

Before selection of equipment, it is recommended to test raw water chemical composition.
Before the water filter, it is preferable to install mechanical filter to ensure long-term equipment service life.

Additional equipment options:

Condensate isolation for tank
By-pass valve – For easier assembly
Repair and maintenance kit – Spanner wrench, injectors (2 pcs.)

Show full description

Technical parameters of equipment	Unit	Model
Technical parameters of equipment	Unit	CMS CAB SLIM	CMS CAB
Flow rate nominal	m³/h	0,5	0,8
Flow rate maximum	m³/h	2,0	2,5
Minimum flow rate for rinsing	m³/h	0,41	0,41
Tank size	inches	8x35	10x35
Tank volume	liters	25	39
The amount of filtering material	liters	18	25
Required water for filter regeneration	liters	70	84
Filter capacity between regeneration (5mg-ekv/l)	liters	4600	6400
The average salt consumption for regeneration	kg	2,50	3,84
Dimensions
Length	cm	47	57
Width	cm	26	33
Height	cm	108	108
Connection. In-out-drain		3/4''-3/4''-3/4''	1''-1’’-3/4''
Clack control unit		CI 1''
Filtration		Ca²⁺, Mg²⁺ (Limescale), Fe²⁺, Mn²⁺ (Rust&Stains)
Regeneration		By Salt NaCl
Container material		FRP (fiberglass)
Filtering material		Ion exchange resins RESINEX KW-8
Operating pressure	bar	2-6
Electric Connection		220V, 50Hz, 1 phase
Electricity consumption	W	3 W