Sand filter WATEX CTQ13

Manufacturer: WATEX

Product code: CTQ13

Price without VAT

€ 455.00

Price with VAT

€ 550.55

– +

In stock:

Delivery time: 2-5 working days

WATER QUALITY PROBLEM

In water supply systems are often observed turbid water caused by water pipe repair, disconnection or cleaning etc. Turbid water may contain sand, mud, iron, organics and various debris that clogs the system, affects the plumbing equipment, measuring devices and creates additional pressure losses.

SOLUTION

WATEX CTQ series devices are meant for reduction of mechanical impurities, it is based on filtration media that filters mechanical admixtures from water. These filters can be used in household and industrial systems, which use heavily mechanically contaminated water. Such water would be uneconomic to clean with traditional cartridge type mechanical filters because of their capacity it too small and would have to be changed very often.

FILTER PERFORMANCE

As a filtration media quartz sand that has been poured in two layers is being used. Sand grain size is 1x3 mm and 3x5 mm. The equipment is simple and operates continuously due to Clack automatic valve. Valve carries an automatic flushing cycles to ensure that filter media is in good condition. After rinsing the filter, material is recovered and is able to continue water purification process. Each filter depending on water consumption, pollution levels and the size of the filter has capacity, after reaching it is necessary to carry out flushing.

Purification process does not require any reagents or costly filtration materials replacement of which would require large financial investments.

EQUIPMENT MAINTENANCE

Electrical connection is needed. It is essential to ensure incoming and outgoing water connections, as well as wastewater discharge line.

Show full description

Technical parameters of equipment	Unit	Model
Technical parameters of equipment	Unit	CTQ8	CTQ9	CTQ10	CTQ12	CTQ13	CTQ14
Flow rate * Q_nom	m³/h	0.63	0.82	1.00	1.46	1.70	2.00
The amount of water for regeneration**	liters	130	180	205	245	285	345
Minimum flow rate for rinsing	m³/h	0.78	0.8	1.0	1.5	1.7	2.0
Tank size (diameter)	inches	8	9	10	12	13	14
Tank size (diameter)	m	0.20	0.23	0.25	0.30	0.33	0.36
Tank volume	liters	25	32	64	85	110	145
The amount of filtration media	liters	15	25	40	55	70	100
Dimensions
Lenght	m	0.21	0.23	0.26	0.30	0.33	0.36
Width	m	0.21	0.23	0.26	0.30	0.33	0.36
Height	m	1.22	1.31	1.53	1.48	1.53	1.85
Water - drain connection	inches	1”
CLACK control valve	model	WS1TC
Filtration		Turbidity
Tank material		FRP (fiberglass)
Filtration media		Silica sand 0.4x0.8 mm, 0.7-1.2 mm, 1x3 mm, 3x5 mm
Operating pressure	bar	2-6