Do you have any questions?
Ask a consultant

WATEX CMS CAB GRAY MIDI water softener

Manufacturer: WATEX
Product code: CMSCABGRAYMIDI
Combination does not exist
619.83
750.00

DESCRIPTION:

  • Effective solution for water softening, iron, manganese and ammonium removal
  • Regeneration with brine solution from salt tablets (NaCl)
  • Reliable and efficient operation for at least 10 years
  • Apply for private houses, cottages, guesthouses connected to central water supply systems
  • Automatic purification and regeneration by volume control
  • Simple installation and maintenance
  • Low operating costs
  • High quality materials, components
  • Filter does not remove smell. WATEX CMB or CTO or AERO should be installed in addition

WATER QUALITY PROBLEM

Hardness salts, Ca and Mg form scale deposits on heat exchangers, nozzles, fittings, pipes, sanitary facilities. Fine technical equipment rapidly out of order or increasing power consumption.

SOLUTION

The solution of these problems for households is softening by WATEX CMS CAB series ion exchange resin filters (reduces limescale) that are regenerated with NaCl. Water softening equipment also effectively reduce iron, manganese and ammonium.

FILTER PERFORMANCE

For recovery of filtration media (ion resins) reagent (NaCl or salt tablets) is used. Wastewaters produced in regeneration processes of equipment in WATEX CMS CAB can be directly discharged to biological wastewater treatment plant. WATEX CMS CAB consists of a filter column, control valve and salt tank. The filter column is filled with ion exchange resin (cationic), which reduces hardness and iron concentration in water. The control valve performs automatic regeneration. Salt tank is filled with a reagent (NaCl, salt tablets) for resin regeneration. Capacity of filtration media is calculated according to amount of resins and raw water quality.                  

FILTER CONTROL

 WATEX CMS CAB is equipped with a Clack WSCI1 control valve, with a built-in flow meter that performs filtration media regeneration according to water consumption. Flowmeter saves water and salt used for filter regeneration. The valve can be fitted with a bypass pipeline that allows to perform maintenance works with ease. Control valve saves all information in case of power failure. Equipment has many parameters that can be adjusted according to needs, such as washing time, frequency, reagent consumption, and so on. It is possible to change the water hardness.

EQUIPMENT MAINTENANCE                                

Although the equipment uses salt tablets for regeneration it is safe to use filtered water for drinking and other human needs. It is necessary to provide electricity connection power (one socket), sewerage drainage and incoming / outgoing water supply with minimum pressure of 2.5 bar.         

RECOMMENDATIONS

  • Before selection of equipment, it is recommended to test raw water chemical composition.
  • Before the water filter, it is preferable to install mechanical filter to ensure long-term equipment service life.

Additional equipment options:

  • Condensate isolation for tank
  • By-pass valve – For easier assembly
  • Repair and maintenance kit – Spanner wrench, injectors (2 pcs.)

                              

            

Show full description

Technical parameters of equipment

Unit

Model

CMS CAB MIDI GREY

Flow rate nominal

m3/h

0,5

Flow rate maximum

m3/h

2,5

Minimum flow rate for rinsing

m3/h

0,41

Tank size  

inches

10x26''

Tank volume

liters

34

The amount of filtering material

liters

18

Required water for filter regeneration

liters

70

Filter capacity between regeneration (5mg-ekv/l)

liters

5000

The average salt consumption for regeneration

kg

3,00

Dimensions

   

Length

cm

58

Width

cm

33

Height

cm

80

Connection. In-out-drain

 

3/4''-3/4''-3/4''

Clack control unit

 

CI 1''

Filtration

 

Ca2+, Mg2+ (Limescale), Fe2+, Mn2+ (Rust&Stains)

Regeneration

 

By Salt NaCl

Container material

 

FRP (fiberglass)

Filtering material

 

Ion exchange resins RESINEX KW-8

Operating pressure

bar

2-6

Electric Connection

 

220V, 50Hz, 1 phase

Electricity consumption

W

3 W

 
 

Width cm

Height cm

Length cm

Weight kg

33.00

82.00

60.00

50.00

Show full description
Show full description