WATEX WRO200 PLUS reverse osmosis system
Advantages:
Quality and performance control
Notes:
Easy to install system allows osmosis to be installed quickly and without excessive installation costs.
Pre-treatment of water is necessary: mechanical filtration, desalination, softening or anti-scalant dosing, activated carbon adsorption in case of high chlorine content in water.
The quality and outlet of the permeate (treated water) depend on the salinity of the incoming water, temperature, pressure, membrane design and pretreatment.
Technical parameters |
Unit |
Model |
WRO200 PLUS |
||
Flow rate Qnom |
liters/hour |
200 |
Flow rate Qmax |
liters/day |
4000 |
Water supply flowrate Qmax |
liters/hour |
2000 |
Grundfos second lift pump |
|
SBA 3-35 A |
Recovery max. |
% |
70 |
Operating pressure max. |
bar |
15 |
System size (Length x Width x Height) |
cm |
84 x 70 x 166 |
Electricity connection |
V |
1 x 220-240 |
Power consumption |
kW |
1.5 |
Membrane element model & quantity |
|
CSM RE4021-BLN x2 |
Connection (in,out,drain) |
mm |
D16 PVC piping with brass inside threaded adaptor ¾’’, ¾’’, ¾’’ |
Weight |
kg |
100 |
Water reservoir |
Liters |
500 |
System frame |
Stainless steel AISI304 |
|
High pressure pump |
MWG |
|
Quality control |
Electrical conductivity 0 - 500 µs/cm, alarm system |
|
Control system |
Pressure switches, manometers, flow meters, regulating valve |
|
Piping system |
D16 PVC piping |
|
Inlet sediment filter |
PP 5 micron cartridge |
Width cm |
Height cm |
Length cm |
Weight kg |
---|---|---|---|
84.00 |
166.00 |
68.00 |
100.00 |
Technical data sheet: /uploads/TDL_WRO400_WRO200_PLUS_ENG.pdf