Do you have any questions?
Ask a consultant

Sand water filter WATEX MQ9

Manufacturer: WATEX
Product code: MQ09
Combination does not exist
141.22
170.88

WATER QUALITY PROBLEM

In water supply systems are often observed turbid water caused by water pipe repair, disconnection or cleaning etc. Turbid water may contain sand, mud, iron, organics and various debris that clogs the system, affects the plumbing equipment, measuring devices and creates additional pressure losses.

SOLUTION

WATEX MQ series devices are meant for reduction of mechanical impurities, it is based on filtration media that filters mechanical admixtures from water. These filters can be used in household and industrial systems, which use heavily mechanically contaminated water. Such water would be uneconomic to clean with traditional cartridge type mechanical filters because of their capacity it too small and would have to be changed very often.

FILTER PERFORMANCE

As a filtration media quartz sand that has been poured in two layers is being used. Sand grain size is 1x3 mm and 3x5 mm. The equipment is simple, it does not need electricity connection and operates continuously. However, in the time mechanical impurities are accumulated on quartz sand surface and it reduces filter capacity, pressure loss increases, so it is necessary to carry out the flushing. Flushing must be performed manually by turning the valve in the top of filter, and when flushing has happened, it must be returned to its original position. After rinsing the filter, material is recovered and is able to continue water purification process. Each filter depending on water consumption, pollution levels and the size of the filter has capacity, after reaching it is necessary to carry out flushing.

Purification process does not require any reagents or costly filtration media replacement of which would require large financial investments.
                   
EQUIPMENT MAINTENANCE                                

Electrical connection is not needed. It is essential to ensure incoming and outgoing water connections, as well as wastewater discharge line.

 

 

 

Show full description

Technical parameters of equipment

Unit

Model

MQ8

MQ9

MQ10

MQ12

MQ13

MQ14

Flow rate * Qnom

m3/h

0.63

0.82

1.00

1.46

1.70

2.00

The amount of water for regeneration**

liters

130

180

205

245

285

345

Minimum flow rate for rinsing

m3/h

0.78

0.8

1.0

1.5

1.7

2.0

Tank size (diameter) 

inches

8

9

10

12

13

14

m

0.20

0.23

0.25

0.30

0.33

0.36

Tank volume

liters

25

32

64

85

110

145

The amount of filtration media

liters

15

25

40

55

70

100

Dimensions

 

Lenght

m

0.21

0.23

0.26

0.30

0.33

0.36

Width

m

0.21

0.23

0.26

0.30

0.33

0.36

Height

m

1.22

1.31

1.53

1.48

1.53

1.85

Water - drain connection

inches

1”

CANATURE control valve

model

BNT111

Filtration

 

Turbidity

Tank material

 

FRP (fiberglass)

Filtration media

 

Silica sand 0.4x0.8 mm, 0.7-1.2 mm, 1x3 mm, 3x5 mm

Operating pressure

bar

2-6

 

* Filtration speed 20 m/h

** Backwash 10 min

 

Width cm

Height cm

Length cm

Weight kg

25.00

140.00

25.00

45.85

Show full description
Show full description