Water filter MF10-1'' WATEX

• Popular design, transparent
• Completely resistant to rust, corrosion
• Standard intel/outlet pipe brass port thread Female 1’’
• Withstands water pressure up to 8.5 bars
• Built-in manual bleed valve button
• Top seated “o” ring gasket
• Accepts most standard 10’’ cartridges (Sediment, CTO, GAC, Ceramic etc.)
• Fast cartridge change
• Various filter cartridges for option
• Carton Box Size 135 x 135 x 325 mm

WATEX MF10-1 water filter is suitable for family, hotel, restaurant use. You can choose proper filter cartridges according to the local water quality. It can use almost all 10’’ standard cartridges available in the market.

All cartridges should be discarded when no longer effective.

The granular activated carbon cartridge will contain a very small amount of carbon fines (very fine black powder) and a new cartridge, after installation, should be flushed with sufficient water to remove all traces of fines from your water system before using the water.

Each time you use water from your filtered water tap for drinking or cooking purposes, it is recommended that you run (flush) the tap for at least 10 seconds prior to using water. This is particularly important if the water tap has not been used daily.

WARNING! The filter must be protected against freezing. Failure to do so may result in cracking of the filter and water leaking.

USE ONLY FOR COLD WATER. DO NOT INSTALL ON HOT WATER FILTRATION.